X-CANv8 Headphone Amplifier
The X-CANv8 is a huge advance over the outgoing X-CANv3. The difference is similar to comparing an Audi A4 compared to an Audi RS4. They both look similar but the performance is light years apart. The X-CANv8 will drive any headphone easily (including the wicked AKG1000) and deliver sweet neutral dynamic sound with a colossal sound stage and effortless dynamic range. You simply don’t know what your headphones are capable of until they’re driven by an X-CANv8, it’s that good. Listen and you’ll have your ears and eyes opened to a new world.
Power amp output stage using the same output transistors as the A1. |
Ultra low output impedance. |
Ultra low output impedance. |
Can drive any headphone available with ease with a completely flat frequency response and low distortion. |
Tube triode Class A front end. |
Exquisite delicate sound. |
USB input. |
Allows direct input from your computer. |
Two headphone outlets. |
Allows two of you to enjoy yourselves together without disturbing anybody else. |
Output: |
|
Power |
1.3 Watts per channel into 32 Ohms
|
Output devices per channel |
|
| Output Impedance |
2 Ohms
|
Line Input: |
|
THD + N, 20Hz to 20kHz |
<0.008% typical |
Signal / Noise ratio |
>100dB unweighted
>109dB 'A' weighted
|
| Input Impedance |
22 k Ohms |
| Frequency response |
20Hz to 70 kHz, +0, -1db
|
Connections: |
|
Line Level inputs |
1 pair line level RCA connectors
|
| Line Level outputs |
1 pair RCA [loop outputs] |
| Digital inputs |
1 USB 1.1 [32, 44.1, 48 kHz sample rates] connection for computer only
|
Power Requirement: |
|
12-0-12V (24V total)
AC at 500mA |
Using mains adaptor (supplied)
|
| Standard Accessories: |
|
| Power Supply Unit |
T48A-24-500-3
1 off
|
| Dimensions: |
|
| Main Unit |
180mm, 7 inches wide
88mm, 3.5 inches high including feet
240mm, 9.5 inches deep including terminals
|
| Weight: |
|
| Unboxed |
1.85kg, 4.25 lbs |
| Boxed unit including power supply and all accessories |
2.5kg, 5.5 lbs |
|
