X-T100 Amplifier
The X-T100 is based around exactly the same concepts as used in our super-integrated series (Nu-Vista M3, Tri-Vista 300, kW500 and kW550). Not surprisingly, even though it has much less power, the sound quality is almost indistinguishable from its illustrious siblings. The X-T100 is true budget esoterica. Pair it with the right sort of loudspeakers and you really can get a true high end sound. It's not surprising really because all the concepts behind the X-T100 and the circuitry employed are exactly the same as on our most expensive amplifiers. This puppy has to be heard to be believed.
| Tube preamp stage. |
Sweet accurate sound quality. |
| High quality phono stage. |
Makes your vinyl discs sound great. |
| High quality high current low distortion power amp. |
Drives most speakers easily and has a remarkable seamless ungrainy sound quality. |
| Free-standing external PSU. |
No nasty magnetic hysteresis effects near the delicate circuitry. |
Output: |
|
Power |
70 Watts per channel into 8 ohms (18dBW)
100 Watts per channel into 4 ohms |
Voltage RMS |
>20 Volts 20Hz to 20 kHz |
Voltage Peak-to-peak |
67 Volts |
Current Peak-to-peak |
30 Amps |
Damping factor |
80 |
Output devices per channel |
2 |
Pre-output impedance
|
47 Ohms |
Line inputs: |
|
THD + noise, 20 Hz to 20 kHz |
< 0.01% |
Signal / noise ratio |
>98dB 'A'-weighted |
Input sensitivity for 70 watts |
172mV |
Input impedance |
220k Ohms |
Overload margin |
26dB |
Channel separation |
> 80dB typical |
| Frequency response
|
20Hz to 20kHz, + 0, - 0.2dB |
Phono input: |
|
Signal / noise ratio |
> 96dB 'A'-weighted |
Input sensitivity |
2.5mV (moving magnet) |
Input impedance |
47k Ohms |
Overload margin |
|
Connections: |
|
Line level inputs |
3 pairs line level RCA connectors
1 front panel 3.5mm jack socket (sharing AUX1 input)
1 pair phono (MM) RCA connectors |
Line level outputs |
1 pair RCA [preamp] controlled by the volume
1 pair RCA [tape record] fixed line level output |
Speaker outputs |
1 pair 4mm banana plug/binding posts per channel |
Power requirement |
For use only with suitable Musical Fidelity power supply. (A Triple-X unit is included) |
Weight: |
|
Unit only, unboxed |
3.85kg, 8.5lbs |
| In shipping carton (including triple-X PSU) |
11kg, 24.2lbs
|
| Standard accessories: |
|
| |
Remote control (A5 universal type)
2 batteries size LR03 or AAA, manganese alkaline type Triple-X PSU |
|
