| Output: |
|
| Voltage, RMS |
45 Volts 20Hz to 20 kHz |
| Voltage, Peak-to-Peak |
127.3 Volts |
| Power |
250 Watts per channel into 8 Ohms (24dBW)
400 Watts per channel into 4 Ohms |
| Current peak-to-peak |
75 Amps |
| Damping Factor |
170 |
| Output devices per channel |
4 |
| Pre-out impedance |
50 Ohms
|
| Line input: |
|
| THD + N, 20Hz to 20 kHz |
<0.01% typical |
| Signal / noise ratio |
>100dB 'A'-weighted |
| Input sensitivity for 250W |
330mV |
| Input impedance |
38K Ohms |
| Overload Margin |
30dB |
| Channel Separation |
>70dB typical |
| Frequency response |
20Hz to 20 kHz, +0, -0.1dB |
| Phono input response |
RIAA/IEC combined |
| Signal / noise ratio |
>96dB 'A'-weighted |
| Input sensitivity |
2.5mV (Moving Magnet) |
| Input impedance |
47K Ohms |
| Overload margin |
30dB
|
| Connections: |
|
| Line level inputs |
4 pairs line level RCA connectors
1 pair phono (MM) RCA connectors |
| Line level outputs |
1 pair RCA [preamp] controlled by the volume
1 pair RCA [ tape record] fixed line level |
| Digital inputs |
1 USB 1.1 [32, 44.1, 48 kHz sample rates] connection for computer only |
| Remote input |
1 3.5mm (mono) jack socket >3V pk-pk 38KHz modulated or unmodulated |
| Speaker outputs |
1 pair 4mm banana plug/binding posts per channel
|
| Power requirement: |
|
| 100 / 115 / 230Volts AC |
700 Watts maximum into 8 Ohms, 45 Watts idle |
| 50 / 60Hz (factory pre-set) |
|
| Standard Accessories: |
|
| Mains lead |
10 Amp IEC type, 1 off |
| Remote control |
A5.5, universal, 1 off |
| Batteries |
Size LR03 or AAA managanese alkaline type, 2 off
|
| Dimensions: |
|
| Unit only |
440mm, 17 1/3 inches wide |
| |
125mm, 5 inches high inc. feet |
| |
400mm, 15 3/4 inches deep inc. terminals |
| Unit in shipping carton |
555mm, 22 inches wide |
| |
290mm, 11 1/2 inches high |
| |
525mm, 20 3/4 inches deep
|
| Weight: |
|
| Unboxed |
16.6kg, 36 3/4 lbs |
| In shipping carton, including all accessories |
21.3kg, 46 3/4 lbs |
