Output: |
|
Voltage, RMS |
29 Volts 20Hz to 20kHz |
Voltage, peak-to-peak |
84 Volts |
Impedance |
50 Ohms |
Frequency response
|
20Hz to 20kHz, ±0dB |
Line inputs: |
|
Total harmonic distortion + noise, 20Hz to 20kHz |
< 0.01% |
Signal / noise ratio reference 1 Volt RMS output |
> 100dB 'A'-weighted |
Input sensitivity for 1 Volt output |
240mV |
Input impedance |
220k Ohms |
Gain at maximum volume |
12.5dB (4.2 times) |
Overload margin |
31dB |
Channel separation
|
> 70dB typical |
Home Theatre Direct input: |
|
Input sensitivity |
Zero gain, not effected by volume control |
Phono input |
|
Frequency response reference IEC RIAA - |
see graph |
Signal / noise ratio ref.1 Volt RMS output |
> 94dB 'A'-weighted moving magnet
> 88dB 'A'-weighted moving coil |
Input sensitivity for 1 Volt RMS output at 1kHz |
2.5mV moving magnet
370µV moving coil |
Input impedance |
47k Ohms |
Overload margin
|
Moving magnet : 31.2dB,
Moving coil : 30.9dB |
General: |
|
Inputs |
4 pairs line level RCA connectors,
1 pair (home theatre direct) power amplifier input RCA connectors
1 pair phono RCA connectors |
Outputs |
1 pair RCA main output controlled by the volume,
1 pair RCA tape record fixed line level output. |
Power requirement |
100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 10 Watts maximum |
Weight |
13.15 kg, 29 lbs unit only, unboxed
18 kg, 39.5 lbs in shipping carton |
Dimensions |
440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
397 mm, 15.6 inches deep including terminals |
Standard accessories |
IEC type mains lead (10-Amp type),
Remote control (A5 type - universal),
2 batteries size LR03 or AAA, manganese alkaline type |
