Output: |
|
Power |
250 Watts per channel into 8 Ohms (24dBW), 400 Watts per channel into 4 Ohms |
Voltage, RMS |
45 Volts 20Hz to 20kHz |
Voltage, Peak-to-peak |
127.3 Volts |
Current peak-to-peak |
75 Amps |
Damping factor |
140 |
Output devices per channel |
4 |
Pre-out impedance
|
50 Ohms |
Line inputs: |
|
Total harmonic distortion + noise, 20Hz to 20kHz |
< 0.01% |
Signal / noise ratio |
> 100dB 'A'-weighted |
Input sensitivity for 250 Watts into 8 Ohms |
330mV |
Input impedance |
220k Ohms |
Overload margin |
26dB |
Channel separation |
> 70dB typical |
Frequency response |
20Hz to 20kHz, +0, -0.2dB |
Home Theatre Direct input |
|
Input sensitivity
|
30dB gain (31.5 times) nominal |
Phono input: |
|
Frequency response reference |
IEC RIAA - see graph below |
Signal / noise ratio |
> 96dB 'A'-weighted |
Input sensitivity |
2.5mV (moving magnet) |
Input impedance |
47k Ohms |
Overload margin
|
24dB |
General: |
|
Inputs |
4 pairs line level RCA connectors.
1 pair (Home Theatre) direct power amplifier input RCA connectors.
1 pair phono (moving magnet) RCA connectors. |
Outputs |
2 amplifier channels via 1 pair per channel binding posts.
1 pair RCA audio outputs controlled by the volume.
1 pair RCA tape record fixed line level output. |
Power requirement |
100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
700 Watts maximum into 8 Ohms, 35 Watts idle |
Weight |
16.6 kg, 36.6 lbs unit only, unboxed
19.1 kg, 42.1 lbs in shipping carton |
Dimensions |
440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
400 mm, 15.75 inches deep including terminals |
Standard accessories |
IEC type mains lead (10-Amp type),
remote control (A5, universal type),
2 batteries size LR03 or AAA, manganese alkaline type |
