Output: |
|
Voltage RMS, maximum |
> 43 Volts |
Impedance |
32 Ohms |
Frequency response deviation from RIAA
|
20Hz to 20kHz ±0.1dB |
Input: |
|
Total harmonic distortion + noise, 20Hz to 20kHz |
< 0.012% (MM, 10 Volts output) |
Input sensitivity for 300mV RMS output |
2.9mV Moving Magnet, 500µV Moving Coil |
Input impedance |
MC: Switched, 10 Ohms internal, or user adjustable by external RCA-type loading plug. Without plug 47k Ohms.
Input capacitance 470pF.
MM: All switches up : 68k Ohms in parallel with 47pF,
- Switch no. 1 down : 47k Ohms + 47pF,
- Switch no. 2 down : extra 50pF added,
- Switch no. 3 down : extra 100pF added,
- Switch no. 4 down : extra 200pF added |
Overload margin |
42dB above rated input at 1kHz (MM) |
Channel separation |
> 64dB 20Hz to 20kHz |
Channel balance error |
< 0.5dB typical |
Signal / noise ref. 1Volt RMS output |
> 78dB Moving Magnet ('A'-weighted)
> 75dB Moving Coil ('A'-weighted) |
Frequency response reference IEC, RIAA
|
- see graph . . . . |
General: |
|
Input sockets: |
2 phono Moving Magnet via RCA connector
2 phono Moving Coil via RCA connector |
Output sockets: |
2 RCA connectors for line level output |
Power requirements: |
115 / 230 Volts or 100 V AC 50 / 60Hz (factory preset) 25 watts maximum |
Dimensions: |
483mm, 19 inches wide
167mm, 6.6 inches high (including feet)
456mm, 18 inches deep (including buttons and rear terminals) |
Weights: |
18.15Kg, 40 lbs unit only, unboxed
23Kg, 51 lbs in shipping carton |
Standard accessories: |
IEC mains lead - 10 Amp type
Moving coil pickup loading plugs, (2 each) of 100, 200, 500, 1K and 5K Ohms resistance |
